|
상세 정보 |
|||
| 공기 각측정속도: | 18.0 -29.0m/s | 재의 집중: | 10.7±7g/ m3 |
|---|---|---|---|
| 먼지입자: | < 150μm | 모래의 집중: | 0.18+0.2g/m3 ; 1.1+0.3g/m3 ; 2.2+0.5g/m3 |
| 샌드 입자: | 149μm - 600μm, 600μm - 850μm | ||
| 하이 라이트: | MIL-STD-810G Sand Test Chamber,510 Blowing Sand Test Chamber,149uM dust test chamber |
||
제품 설명
Description of Dust And Sand Test Chamber
MIL-STD-810G 510 blowing Dust and sand test chamber,Sand and dust environments include a wide range of materials and particulate size distributions. As a result, this method includes two procedures: the dust procedures and the sand procedures.
Dust ingress testing evaluates the effectiveness of filters and of material at resisting the effects of dust. Sand ingress testing evaluates the ability of material to withstand blowing sand conditions without degrading in performance or maintainability.
Technical Specification of Dust and Sand Test Chamber
| Name | MIL-STD-810G 510 Blowing Dust And Sand Test Chamber |
| Model | DIM-1000 |
| Internal Dimension | 1000*1000*1000mm D*W*H |
| Overall Dimension | 2800*3500*2000mm D*W*H |
| Interior Volume | 1000L |
| Air velocity | 1.5 -8.9m/s |
| Concentration of dust | 10.7±7g/ m³ |
| Dust particles | ＜ 150μm |
| Air velocity | 18.0 -29.0m/s |
| Concentration of sand | 0.18+0.2g/m³; 1.1+0.3g/m³; 2.2+0.5g/m³ |
| Sand particles | 149μm - 600μm, 600μm - 850μm |
| Controller | Programmable color LCD touch screen controller |
| Door Lock | Electromagnetic lock |
| Testing Platform Diameter | 600mm |
| Testing Platform Speed | 1-7 r.p.m |
| Exterior Material | A3 Steel Plate with protective coating |
| Interior Material | SUS304 stainless steel |
| Standard | MIL-STD- 810g |
Dust cycle of MIL-STD-810H Dust and Sand Test Chamber
Use of MIL-STD-810H Dust and Sand Test Chamber
MIL STD sand test equipment use this method to evaluate mechanical, optical, electrical, electronic, electrochemical, and electromechanical devices exposed to sand or dust atmospheres.
Sand and dust machine is not suitable for determining the effects of a buildup of electrostatic charge. Additionally, because of control problems, this Method does not address sand or dust testing outdoors. It also does not address settling dust.
Test conditions that must be confirmed
*Test standard;
*Name and size of the test sample;
*Test surface and area;
*Sample test direction;
*Test Angle;Test time;
*Sand particle size;
*Sand blowing concentration;
*Test the wind speed;
*Test temperature;
*Relative humidity.